The RELDAIR system can be used succesfully:



click on image for a bigger picture		 1. The RN-1800 System
This is the approved and renowned 120 BAR/1,800 P.S.I. system that has been praised for years by growers all over the world for its fine and smooth fog, which is spread evenly and does not wet the crop. The system does not need compressed air.


click on image for a bigger picture

click on image for a bigger picture

2. The RT-1000 System
This system is a 70 BAR/1,000 P.S.I. system. The same high quality as for the RN-1800 system, but a simpler construction and droplets which are just slightly bigger. The system does not need compressed air.
click on image for a bigger picture


click on image for a bigger picture

Type of nozzles in stock

RN - nozzle 4,0 L/h average droplet size 7 micron
RN - nozzle 6,5 L/h average droplet size 10 micron
RT - nozzle 5,0 L/h average droplet size 20 micron
Fanfog nozzle 8,0 L/h average droplet size 10 micron

Other capacities available on demand

3. The Fanfog System
A 120 BAR/1,800 P.S.I. system which has a tube with nozzles, fixed on a ventilator. The tube is mounted in a horizontal way to prevent the nozzles from dripping. Suitable for large areas. The system does not need compressed air.
Technical information Fanfog

Type Diameter Capacity Voltage Range Power
R 14-9 14” 3.500 m2 per hr 230 V 25 m 110 Watt
R 16-9 16” 4.200 m2 per hr 230 V 35 m 110 Watt
R 18-9 18” 5.100 m2 per hr 230 V 50 m 130 Watt
R 20-9 20” 6.200 m2 per hr 230 V 55 m 150 Watt
 
Operation and maintenance
The computer or stand-alone sensor measures the humidity in the shed, greenhouse or other area and compares this measurement with a set value. When the actual value is below set point, the RELDAIR installation will be activated into fogging. By way of a breaktank and filters the pump ensures a constant high pressure. The result is a very fine fog consisting of tiny particles of water. The fog is that “dry” that it evaporates in the air and does not descend on the crop. The evaporation causes a drop in temperature as well. Maintenance consists of checking oil and waterfilters and the regular servicing of the pump.
 
Pumps
Type Power Capacity
AD 3 1.5 KW 180 L/h
AD 5 2.2 KW 300 L/h
AD 7 2.2 KW 420 L/h
AD 10 3.0 KW 600 L/h
AD 15 4.0 KW 900 L/h
AD 20 5.5 KW 1200 L/h
AD 30 7.5 KW 1800 L/h
AD 40 11.0 KW 2400 L/h

Options for the various high pressure systems
• Non-drip valves to help prevent dripping
• Stand-alone sensors in case a climate control is not available
• Stainless steel pipe instead of hose
• Stainless steel couplings
• Non-drip valves to prevent icing up in the storage room

4. The RELDAIR Ultrasonic Humidification System
Contrary to the high-pressure systems, this system uses high frequent (ultrasonic) vibrations to create aqueous particles in the air. These aqueous particles are even smaller than those of the high-pressure system: between 1 and 3 micron. A special air displacement system blows the droplets into the room. The RELDAIR ultrasonic system is characteristic for its moderate use of energy together with very few maintenance requirements. On top of that, the system is noiseless.
Highly suitable for smaller areas.